Floor Coating

ECO-TANSUNGTAN SOFT

usage
Flooring material for school athletic facilities(running track), multipurpose arenas and concrete surfaces requiring elasticity

ECO-TANSUNGTAN SOFT is heavy-metal free and meets KS F 3888-2 standards. It is a solvent-free elastic urethane intermediate coat which has excellent adhesion, wear resistance and shock resistance. High build films can be obtained in a single coat. It has good leveling and elasticity thus it is suitable for athletics track(running track) and sports stadium.

specification

Paint type
Polyurethane resin (Two-Component)
Drying time
Drying time
Category 5℃ 20℃ 30℃
Set to Touch 15 hours 8 hours 5 hours
Dry-through 48 hours 24 hours 15 hours
Over-coat (Min.) 48 hours 24 hours 24 hours
Over-coat (Max.) 60 hours 48 hours 48 hours
Pot life 60 minutes 30 minutes 20 minutes
Thinner
DR-700, DR-700L, DR-790
Dilution ratio
▷ No dilution
Specific gravity
Approx. 1.40 (based on green color)
Solid volume ratio
93±3 % (based on green color)
Theoretical Coverage
4.5 ㎏/㎡ (3㎜)
Thickness of dried film
2 - 3 ㎜
Color
Green, other ordered colors
Gloss
Glossy
Mixing ratio
Base(A)/Hardener(B)=3/1(Weight ratio)
Packaging unit
20 ㎏ [Base(15 ㎏), Hardener(5 ㎏)]
Shelf life
6 months (5~35℃ Indoor storage)
Flash Point
60℃

PRODUCT PROPERTIES (PHYSICAL PROPERTY DATA)

Tensile strength
More than 1.5 N/㎟
Hardness
Shore A 30 ~ 50
Elongation rate
More than 450%

how to use

Surface treatment
1. Cure concrete for at least 28 days at a temperature of 21℃ and a relative humidity of 50%.
2. Completely remove oil, moisture, sand, dust, laitance and foreign substances from the surface and maintain surface smoothness.
3. For high-strength concrete (260㎏/㎠ or higher), blasting treatment should be carried out.
Coating method
1. Reinforce cracks, crevices, and joints between walls and floors with the NEW-THANSUNG SEAL.
2. Apply smoothly on the undercoated surface using sawtooth scraper, rubber scraper, pitchfork, roller, etc.

Appropriate construction specifications
▷Primer : CLEANTHANE 1000
▷Intermediate coating : ECO-TANSUNGTAN SOFT Intermediate coating
▷Top coat : Topcoat for athletics track or playground (SOFT, SEMIHARD)
Coating conditions
1. Atmosphere Temperature: 5~35℃, Surface Temperature: 40℃ or below, Relative Humidity: 80% or less moisture content in the concrete: 6% or less
2. During scorching heat in the summer (atmospheric temperature: 28℃ or higher; surface temperature: 40℃ or higher), please apply after 4 pm when the surface temperature drops. `
3. Scrape (or front-putty) the concrete surface to a thickness of about 0.5 to 1.0mm to minimize the occurrence of pinholes and bubbles due to pores there. For intermediate coat, apply the scrapping in the first place and then the main coating in two separate runs.