Floor Coating

YEGREENA CRYSTAL 100

usage
Epoxy flooring material for concrete surfaces (an effect of improved interior design by clear intermediate coating and top coat)

This paint is a 2K non-solvent type epoxy clear paint composed mainly of non-solvent-based epoxy resin and modified amine resin. It is excellent in the hardness of dry film, adhesion, durability, chemical resistance and dust proofness. In particular, it is superior to the CLEANPOXY LINING CLEAR paint in terms of yellowing resistance. It has excellent smoothness and can form a beautiful appearance after painting. It is more effective if an interior design is applied before applying this paint.

specification

Paint type
Modified epoxy / Modified amine (2-Component)
Drying time
Drying time
Category 5℃ 20℃ 30℃
Set-to-touch 10 hours 5 hours 3 hours
Dry-through 48 hours 24 hours 18 hours
Over-coat (Min.) 72 hours 48 hours 24 hours
Over-coat (Max.) 9 days 4 days 3 days
Pot life 60 minutes 30 minutes 15 minutes
Thinner
Not Applicable
Specific gravity
Approx. 1.09
Dilution ratio
▷No dilution ▷In case of high viscosity in the winter season, dilute within the volume ratio 1%
Theoretical Coverage
3.4 ㎏/㎡ (Based on 3.0 ㎜)
Solid volume ratio
96±3 %
Color
Clear (Compounds)
Thickness of dried film
2~3 ㎜
Mixing ratio
Base(A)/hardener(B)=3/1 (Weight ratio)
Gloss
Glossy
Shelf life
12 months
Packaging unit
16L (Compounds)

how to use

Surface treatment
1. Cure concrete for at least 28 days at a temperature of 21℃ and a relative humidity of 50%.
2. Completely remove the oil, moisture, sand, dust, laitance and other foreign matter from the surface and maintain surface smoothness.

Coating method
1. Reinforce cracks, crevices, and joints between walls and floors with an epoxy putty after primer.
2. Apply smoothly using sawtooth scraper, rubber scraper, pitchfork, square towel, etc.
3. Care should be taken since problems may occur such as cratering upon thin coating. (2mm or less - 1 time)
Appropriate construction specifications
▷Primer : CLEANPOXY CLEAR PRIMER, CLEANPOXY PENETRATED PRIMER DNY-200
▷Top coat : Epoxy colored paint(if necessary)
▷Lining : YEGREENA CRYSTAL 100

Coating conditions
1. Atmosphere Temperature: 5~35℃, Surface Temperature: 40℃ or below, Relative Humidity: 80% or less, Moisture content in the concrete: 6% or less
2. Due to the nature of epoxy lining transparent paint, a color difference may be shown over time if the coating surface is a bright color.
3. The degree of occurrence of yellowing varies depending on the long-term exposure to sunlight or the use time of indoor lighting, etc.
4. The use of a thinner more than the recommended amount causes a further delay in drying, decline in hardness, whitening, skid marks, etc.