Floor Coating
DENSIL HYBRID SEALER Colored
- usage
- Dust proof flooring material for concrete floors
This paint is a two-component coat composed mainly of polymer organic resin and inorganic silicate resin. It is excellent in hardness of dry film, adhesion, durability, abrasion resistance, scratch resistance and dust proofness. It has less odor than conventional solvent type flooring. It is suitable for indoors. It can be used as sealer(primer and topcoat) on various substrate including the surface which applied liquid hardener or colored epoxy protective coating.
specification
- Paint type
- Epoxy silicate / Modified amine (Two-Component)
- Drying time
-
Drying time Category 5℃ 20℃ 30℃ Set-to-touch 5 hours 4 hours 3 hours Dry-through 24 hours 12 hours 10 hours Complete dry(day) 9 days 7 days 4 days Pot life 90 minutes 60 minutes 40 minutes Over-coat (day) 2~3 days 1~2 days 1~2 days - Thinner
- If needed, DR-100L less than 3%
- Cleaning thinner
- DR-100L
- Specific gravity
- Approx. 1.19 (Based on green color)
- Theoretical coverage
- 6.6 ㎡/ℓ (Based on 100㎛)
- Solid volume ratio
- 66±2 %
- Color
- Ordered color
- Thickness of dried film
- 50 ~ 100㎛
- Mixing ratio
- Base(A)/Hardener(B)=4.5/1(Weight ratio)
- Gloss
- Glossy
- Shelf life
- 12 months (5~35℃ indoor storage)
- Packaging unit
- 17kg [Base(13.89kg), Hardener(3.11kg)]
how to use
- Surface treatment
- 1. Cure concrete for at least 28 days at a temperature of 21℃ and a relative humidity of 50%.
2. Completely remove the oil, moisture, sand, dust, laitance and other foreign matter from the surface and maintain surface smoothness. - Coating method
- 1. Reinforce cracks, crevices, and joints between walls and floors with an epoxy putty after primer.
2. Apply smoothly to the base surface using a roller, etc. after evenly mixing the base and hardener.
3. Add the hardener to the base and use after evenly mixing for 3-5 minutes with a power stirrer.
Appropriate construction specifications
▷Primer : CLEANPOXY CLEAR PRIMER, CLEANPOXY PENETRATED PRIMER DNY-200
▷Top coat : DENSIL HYBRID SEALER - Coating conditions
- 1. Atmosphere Temperature: 5~35℃, Surface Temperature: 40℃ or below, Relative Humidity: 80% or less
2. Please note that due to the nature of epoxy paint, discoloration and chalking may occur if exposed to the outdoor environment.
3. In case of over-coating on Densil Hybrid Sealer, sanding and surface treatment should be done before it.
4. No dilution is the standard. However, epoxy thinner could be used within 3%, if needed.
5. Excessive dilution may occur gloss-loss or gloss-stain, drying problem.