Heavy Duty Coating

Anythane 2740 Two-component acrylic urethane top coat

Various metal, concrete, and mortared surfaces

This paint is a premium top coat based on acrylic urethane resin and has a firm coating film as well as excellent adhesion, weather resistance, and chemical resistance.
In particular, it is a premium top coat for general industrial facilities due to its beautiful dry film appearance and excellent color retention ability and is suitable for exterior use.


Paint type
Acrylic urethane / Top coat(non-yellowing type) (Two-Component)
Drying time
Drying time
Category 5℃ 20℃ 30℃
Set-to-touch 1 hour 30 minutes 20 minutes
Dry-hard 12 hours 8 hours 6 hours
Over-coat (Min.) 12 hours 8 hours 6 hours
Over-coat (Max.) 1 month 15 days 7 days
Maturation time 30 minutes 20 minutes 10 minutes
Pot life 6 hours 5 hours 3 hours
DR-700, DR-700L
Dilution ratio
▷Brush, Roller: less than 15% ▷Air spray : less than 10%
Specific gravity
Approx. 1.2 (Based on white color)
Theoretical Coverage
12 ㎡/ℓ (1 time - 40㎛)
Solid volume ratio
Approx. 50±1%
White, other colors
Thickness of dried film
Mixing ratio
Base(A)/Hardener(B)=4/1 (Volume ratio)
Flash point
At least 7℃
Glossy, semi-gloss, matte
Shelf life
12 months (Dry, cool, and dark place with good ventilation)


Acrylic urethane
Two-component type acrylic urethane product with excellence weatherability in outdoor environmental conditions.
Excellent film property
The product has solid film and good adherence, weatherability and chemical resistance.

how to use

Surface treatment
1. Completely remove oil, moisture, sand, dust, and other foreign matter from the surface to be coated.
2. Sufficiently dry the surface to be coated before coating.
3. After primer coating, clean up the welded areas (blackened and rusted areas) with a disc sander.
Then, touch up with this paint and continue coating.
Coating method
1. Coating can be done by either brush, roller, or air spray coating.
- Store the coating equipment after cleaning with an exclusive thinner immediately after use.
Preceding and follow-up coating
1. Preceding coating : Epoxy system, urethane system paint
1. Sufficient performance after last coating is achieved after drying for 7 days at 20℃.
2. Since air bubbles may be generated during airless coating, be sure to use DHDC-2740BG type paint
for airless coating.