Industrial Coating
CHEMUV CUV-100 UV WOOD SEALER
- usage
- UV-curable paint for undercoating the wood such as MDF and plywood
CHEMUV CUV-100 UV WOOD SEALER is a UV-curable paint for wood undercoat which mainly consists of light-curable resin along with other resins, photoinitiator, extender pigment, and additives. It features outstanding grain filling, adhesiveness, transparency and superior physico-chemical properties of the film.
specification
- Paint type
- UV-curable paint
- Product features
- 1. It is a UV-curable wood sealer featuring outstanding grain filling performance. 2. It is a UV-curable paint that does not have pot life limitations. 3. It is good for roll coater application.
- Exterior
- Semi-transparent liquid
- Color
- Transparent
- Specific gravity (25 ℃)
- 1.25 ± 0.05
- UV-curing conditions
- 200 ± 100 mJ/㎠
- Coverage (g/㎡)
- 30 ± 10 g/㎡
- Solid content (%)
- Over 95 %
- Viscosity (KU/25 ℃)
- 125 ± 5
- Shelf life
- 6 months
- Thinner
- UV thinner for plywood
how to use
- Surface treatment
- 1) Do not paint on wet wood.
2) Completely remove oil, moisture, sand, dust and foreign substances from the surface. Remove oil, moisture, sand, dust, and other foreign substances on the surface to be painted completely. Remove oil, moisture, sand, dust, and other foreign substances on the surface to be painted completely. Remove oil, moisture, sand, dust, and other foreign substances on the surface to be painted completely. Remove oil, moisture, sand, dust, and other foreign substances on the surface to be painted completely. Remove oil, moisture, sand, dust, and other foreign substances on the surface to be painted completely. Remove oil, moisture, sand, dust, and other foreign substances on the surface to be painted completely.
3) When painting on the surface directly: Sand the substrate with a 120 - 220 eye sander and remove sanding residue with a brush.
4) When painting on top of a primer: Apply the wood sealer after checking the exterior of the primer-painted surface. - Coating method
- "1) Use RRC (reverse roll coater) and DRC (direct roll coater) to roll sufficient amount of UV Wood Sealer, and paint 2 - 4 times.
2. Drying conditions
1) UV drying condition is 200 ± 100 mJ/㎠.
2) Instructions above may vary depending on the type of substrate and the painting line conditions.
* Please inquire the technical department prior to using this product to familiarize yourself with the handling and painting precautions.