Industrial Coating
DVB-2175 Non-solvent-based insulation varnish
- usage
- For dripping/impregnation of electric motors
- data
- 49. DVB-2175.pdf
DVB-2175 is a non-solvent-based insulating varnish of unsaturated polyester type and features type H (180 ℃) heat resistance. This product is almost odorless which can drastically improve work environment. Especially, it is suitable for electric motors.
specification
- Paint type
- Two-component unsaturated polyester resin
- Product Features
- 1. It features outstanding heat resistance. (Type H: 180℃) 2. This product generates little THC while drying. 3. It features outstanding adhesiveness. 4. It features outstanding electrical properties.
- Thinner
- DTB-7303
- Exterior
- Transparent lemon yellow liquid
- Storage stability (40℃) (A + B)
- Over 5 days
- Viscosity
- 8 - 13 POISE
- Curing conditions
- 2 - 4 hours at 120 - 140 ℃
- Specific gravity
- 1.14 ± 0.02
- UL-certified
- Not certified
- Gel time (120 ℃)
- 3 - 5 min.
- Storage conditions
- Store in a shaded indoor space with sufficient ventilation.
- Mixing ratio
- A : B = 100 : 1 (Weight)
- Shelf life
- 6 months from the manufacturing date (when storage conditions are met)
PRODUCT PROPERTIES (PHYSICAL PROPERTY DATA)
- Breakdown voltage
- Above 7 KV (Twist Pair method, MW-35 Coil)
- Volume resistivity
- At least 1.0 × 1014 Ω㎝
how to use
- How to use
- 1. Mix evenly after adding the substances according to the designated mixing ratio.
2. Preheat the substrate at 80 - 120 ℃ for 10 - 30 minutes to eliminate cutting oil and debris from the substrate.
3. Maintain the surface temperature of the substrate at 40 - 50 ℃.
4. Impregnate it in well-mixed varnish for 2 - 5 minutes. (Impregnation in the vacuumed state can increase the penetrance.)
5. Leave until the varnish does not fall off from the substrate (10 - 30 minutes at room temperature).
6. Dry according to the designated curing conditions. - Remarks
- 1. Liquid B (hardener) is sensitive to heat. So store it in a refrigerated space.
2. When the varnish temperature is high, there is a risk of varnish turning into gel. So maintain the varnish temperature inside the tank at below 30 ℃.
3. Instructions above may vary depending on the type of substrate and the painting line conditions.
4. Please refer to the MSDS when handling the product.