Floor Coating
CLEANPOXY EMBOSSING
- usage
- Low noise non-solvent-based epoxy dustproofing flooring material for concrete surfaces
This paint is a 2K epoxy lining paint composed mainly of non-solvent-based epoxy resin and modified amine resin. It is excellent in the hardness of dry film, adhesion, durability, chemical resistance and dust proofness. In particular, it has an effect of reducing the noise generated by vehicle wheels and other objects, which is a disadvantage of existing floor coating materials.
specification
- Paint type
- Modified epoxy / Modified amine (2-Component)
- Drying time
-
Drying time Category 5℃ 20℃ 30℃ Set-to-touch 10 hours 5 hours 3 hours Dry-through 48 hours 24 hours 18 hours Over-coat (Min.) 72 hours 48 hours 24 hours Over-coat (Max.) 9 days 4 days 3 days Pot life 60 minutes 30 minutes 20 minutes - Thinner
- Not Applicable
- Dilution ratio
- ▷No dilution, ▷In case of high viscosity in the winter season, dilute within the volume ratio 1%
- Specific gravity
- Approx. 1.52
- Theoretical Coverage
- 0.80 ㎏/㎡ (Based on 0.5mm)
- Solid volume ratio
- 95±3 %
- Color
- Green, gray, other ordered colors
- Thickness of dried film
- 0.3~1 ㎜
- Mixing ratio
- Base(A)/hardener(B)=6/1 (Weight ratio)
- Gloss
- Glossy
- Shelf life
- 12 months
- Packaging unit
- 14L (Compounds)
how to use
- Surface treatment
- 1. Cure concrete for at least 28 days at a temperature of 21℃ and a relative humidity of 50%.
2. Completely remove the oil, moisture, sand, dust, laitance and other foreign matter from the surface and maintain surface smoothness. - Coating method
- 1. Reinforce cracks, crevices, and joints between walls and floors with an epoxy putty after primer.
2. Apply the paint uniformly using a square towel, etc. and work with a honeycomb roller at the same time.
Appropriate construction specifications
▷Primer : CLEANPOXY CLEAR PRIMER, CLEANPOXY PENETRATE PRIMER DNY-200
▷Lining : CLEANPOXY LINING DHDC-6200(Y)
▷Embo : CLEANPOXY EMBOSSING
▷Top coat : CLEANPOXY 3100, CLEANPOXY COATING, DHDC-2740(if necessary) - Coating conditions
- 1. Atmosphere Temperature: 5~35℃, Surface Temperature: 40℃ or below, Relative Humidity: 80% or less, Moisture content in the concrete: 6% or less
2. Please note that due to the nature of epoxy paint, discoloration and chalking may occur if exposed to the outdoor environment.
3. Please calculate the required amount after test coating because there are many differences depending on the size and frequency of the pattern.
4. The use of a thinner more than the recommended amount causes a further delay in drying, decline in hardness, whitening, skid marks, etc.
Above pot life and follow-up coating time have been measured under laboratory conditions and may vary depending on the construction site.
he film that has passed the maximum follow-up coating time may have adhesion failure. Please apply after checking the proper surface treatment and adhesion.