Architecture Paint

NATURAL INTERIOR PUTTY

usage
Interior concrete of commercial buildings/residential buildings/public facilities, etc.

The natural water-based interior putty is a putty for straw board loading and is a representative product of architectural putty that must be used during the last stage at the construction site. It is a mixture of special synthetic resins, stabilizers and suitable extender pigments. It is excellent in sanding properties as well as excellent in crack resistance, workability and adhesion.

specification

Paint type
Special emulsion water-based interior / Putty
Drying time
Drying time
Category 5℃ 20℃ 30℃
Dry-through 36 hours 24 hours 16 hours
Time required for re-coating (min.) 36 hours 24 hours 16 hours
Thinner
Tap water if necessary up to 5%
Coating Method
Construction knife and scraper for putty
Specific gravity
Approx. 1.75
Solid volume ratio
Approx. 76 %
Theoretical Coverage
1.4 ㎡/Kg
Thickness of dried film
300㎛
Re-coating interval
20℃, Sufficient ventilation for a minimum of 24 hours
Color
Milky white
Gloss
Matte
Storage and preservation
12 months (Dry, cool, and dark place with good ventilation, room temperature 5℃~30℃, humidity less than 80%)

PRODUCT PROPERTIES (PHYSICAL PROPERTY DATA)

Proper basis material
Plasterboard, veneer, mortar, concrete P.C, ALC, straw board
Characteristics
Excellent in sanding ability, workability, adhesion and crack resistance

how to use

Surface treatment
1. Completely remove dust, dirt, oil, etc. after sufficiently curing the basis material. (More than 30 days for new coating)
Coating method
1. Apply by scrapping thinly with a putty construction knife and scraper. If a thick application is required, apply thinly many times.
2. Apply a wet film thickness of 2 mm or below at one time and proceed with the subsequent coating after drying.