Architecture Paint

YEGREENA ELASTIC PAINT Top coat

usage
Multicolor pattern elastic paint for interior of buildings
Non-extended balcony inside of apartments

This paint is a clear coating based on pure acrylic resin with excellent physical properties. It is an eco-friendly water-based type and has little odor during painting. In particular, it has excellent fungus resistance, bacteria resistance, water resistance, alkali resistance and stain resistance. So, it is possible to maintain the appearance of YEGREENA ELASTIC PAINT (intermediate coating) for a long period of time.

specification

Paint type
Water-based acrylic type
Drying time
Drying time
Category 5℃ 20℃ 30℃
Set-to-touch 40 minutes
Dry-hard 2 hours
Thinner
Tap water(dilution rate: up to 5%, volume ratio)
Coating Method
Brush coating
Specific gravity
Approx. 1.0±0.1
Solid volume ratio
Approx. 33 %
Theoretical Coverage
21~23 ㎡/L/1time
Thickness of dried film
15㎛
Gloss
Semi-gloss
Color
Clear
Storage and preservation
12 months (Dry, cool, and dark place with good ventilation, room temperature 5℃~30℃, humidity less than 80%)

PRODUCT PROPERTIES (PHYSICAL PROPERTY DATA)

Superior film property
Fungus resistance, water resistance, and alkali resistance are superior, and the initial coating appearance is maintained for a long period of time.
Environmental impact
It is an eco-friendly product having almost no VOC and odor.

how to use

Surface treatment
1. The material should be sufficiently cured (cured more than 30 days at 20℃)
2. Laitance, dust, oil and other contaminants on the surface must be completely removed.
3. The proper pH of the material must be less than 9, and the percentage of moisture content must be less than 6%.
4. The gaps and grooves on the surface must be filled with exterior water-based putty, and surface adjustment should be made before coating.
Coating method
1. Primer
① Uniformly apply the CLEAR SEALER, which is a specified undercoat, or coat MIXING LIQUID on the base surface once.
2. Intermediate coating
① After the undercoat is completely dried, apply the elastic imtermediate coating for intermediate coating with a special gun.
② Upon spray coating, be sure to work perpendicular to the coating surface to obtain a uniform pattern.
③ Upon using an intermediate coat, dilute with water to less than 5%, and use after sufficient stirring as it is a high viscosity paint.
3. Top Coat
① Apply YEGREENA ELASTIC PAINT(top coat) once after the intermediate coating material has completely dried for mold resistance.