Architecture Paint

FIRE KEEPER (MATTE) Flame-resistant oil-based clear DFL-100F

usage
Inside buildings veneer, medium density fiberboard (MDF), and wood that require a flame retardant function
Flame retardant treatment for veneer and wood in special areas designated by Presidential Decree.

Fire Keeper (Matte) flame-resistant oil-based clear DFL-100F product is a foaming flame-resistant paint made mainly of chlorinated rubber resin. It is a special functional paint that is mainly applied on flammable materials such as plywood, wood, etc. and has an effect of preventing or delaying combustion of wood at the onset of a fire.

specification

Paint type
Chlorinated rubber system
Drying time
Drying time
Category 5℃ 20℃ 30℃
Dry-hard 4 hours
Time required for re-coating (min.) 2 hours
Thinner
Flame-resistant paint thinner
Dilution ratio
Up to 20% depending on the painting tool
Specific gravity
Approx. 1.1
Type approval No.
YUM 16-6
Theoretical Coverage
4.2 ㎡/ℓ
Solid volume ratio
Approx. 44±1
Re-coating interval
25℃, sufficient ventilation for a minimum of 2 hours
Thickness of dried film
105㎛ (3~4 coats recommended)
Color
Transparent
Gloss
Matte

PRODUCT PROPERTIES (PHYSICAL PROPERTY DATA)

Flame-resistant performance
Flame-resistant performance is excellent, thereby maintaining semi-permanent flame-resistant performance.
Workability
Workability is excellent due to its quick-drying ability, and the dry film appearance is superior.
Durability
Water resistance and durability are excellent.
Professionalism
Flame-resistant paint is recognized as flame retardant treatment only when applied by a registered fire retardant treatment business among firefighting facilities businesses.

how to use

Surface treatment
1. Completely remove oil, moisture and foreign substances from the surface.
2. For undercoating, use the designated primer, HILAC PLUS SANDING SEALER.
Coating method
1. Sufficiently stir before use.
2. Apply 3 times or more after sufficiently stirring by adding designated thinner up to 20% depending on the coating equipment.
(Paint using only flame retardant paint without using a separate primer.)
3. Upon re-coating following the primary coating, apply after completely drying for at least 2 hours at 25℃ .
4. The amount of dough (D,F,T) should be 105㎛ (0.105㎜) or more.